600BPH 5 gallon bottlel water filling machine Drinking bottled
water production line device
The whole 600BPH gallon water filling line includes Automatic
De-capper, Rotary external washer, L type Washer/Filler/Capper,
Heat Shrinking Machine, Checking Light
hot alkaline water washing Gallon water production
equipmen/line/device with bottle holder |
| | |
| | |
| Brush Internal-External Bottle Washer | |
| Washer/Filler/Capper with auto bottle loading | |
| | |
| | |
| | |
1, Automatic De-capper:
This machine is driven by cylinder, controlled by PLC; Automatic
working by barrel checking; The
machine has two de-capping heads. De-capping head is composed by
claw device and cylinder, de-capping
head position can move up and down, claw device can be adjusted
slightly to be suitable for different caps.
When the gallon bottle comes into the machine, the de-capping head
will go down and claw device will
hold tightly barrel cap sides, and then lift the barrel to take off
the caps; And when the caps are taken off,
the compressor air will blow the caps into cap hopper, then fall
outside into client’s own holder;
The claw pressure is adjusted to protect caps;
De-capping head: 2 heads
Dimension: 900*600*2000mm
Weight: 130kg
2, Rotary external washer
The machine is completely blocked to stop water leakage, when the
gallon bottles are sent to washing
position, the cylinder will stop 4 bottles inside and fixed them by
brushes and fixing bar, the water will be
pumped and jetted to bottle body, bottle rotates together with
brushes; The bottles will be cleaned by
brushes and water function;
No air compressor needed, it is easy for production and
maintenance;
Parameters:
Brush qty: 5pcs*2Dimension: 1500*1100*1750mm
Weight: 350KG
Power: 0.55KW
Recycle water tank size: 600*550*550mm
3, Monoblock gallon rinser-filler-capper
The machine is integrated washing filling and capping together. It
is ideal machine to produce barrel
water. The whole machine is using stainless steel 202 shell, rust
resistant, can be cleaned easily.Main
electric parts are all branded. Air channel system use Air TAC
brand product.The machine is with compact
construction, just occupy small room, working efficiency is high.
The machine only need 2 operators to
control, is a good choice for factory.
The machine set-up do not need plug floor screw, after case taking
off, set the machine on the flat floor,
and then adjust stand height and adjust all stand pressure to be
average. After the machine is set up well,
get in through water pipe, drain pipe and power, air power.
4.Heat Shrinking Machine
Whole SUS304 construction, including electrical boiler to generate
steam and shrink tunnel especially for
barrel cap film;
Power: 20KW
Dimension: 800*600*1200mm
Weight: 100kg
